Prova Shower System Review 2026: Kit, Niche and Extension
By Julian Gill Updated · 7 min read
Disclosure: Some of the links in this article may be affiliate links, which can provide compensation to me at no cost to you. You can read our affiliate disclosure in our privacy policy.
In this article
Every tiled shower depends on what is under the tile. Grout and tile are not waterproof, so without a proper membrane, water slowly reaches the subfloor and the wall studs. The Prova shower system is a prefabricated way to stop that, and in this review I look at what it includes, how it works and who it suits.
Quick answer
The Prova shower system is a good choice if you want a tiled shower without building a sloped mortar bed. The preformed pan, PVC flange, joints and sealant go in within a few hours with common tools. Pay close attention to the seams and wall-to-floor joints, because that is where any waterproofing system succeeds or fails.
Prova-Shower is a complete shower waterproofing system designed to protect your floor and walls from water damage. Prova states a warranty of up to 25 years on the system's function, plus a 10-year manufacturer's warranty on its products. Always register and keep your receipt, because the conditions depend on following the installation instructions.
The Prova Products at a Glance
- Complete shower kit Prova TT8509BRZ05 Waterproofing Shower Kit
- Built-in storage Prova TT8800NCH33 Shower Niche
- Larger shower footprint Prova Shower Extension Kit
Prova Products Compared
| Product | Size | Finish | Key feature | Price |
|---|---|---|---|---|
| Prova TT8509BRZ05 Waterproofing Shower Kit | 32 x 60 in | Bronze drain | Protects wall cavities from water and vapor | Check Price |
| Prova TT8800NCH33 Waterproof Shower Niche | 33 x 16 in | Grey | Adjustable | Check Price |
| Prova Shower Extension Kit | 12 x 36 in | White | Pre-sloped high-density Styrofoam tray | Check Price |
Prova Shower System Reviews
The TT8509BRZ05 contains the components you need to build a fully bonded, watertight shower floor. Its preformed sloped pan replaces the traditional sloped mortar bed, which saves a lot of time and makes a tiled shower possible in places where mud work is not practical.
The kit uses a center drain with a bronze drain finish. It comes ready to install with the sloped pan, the Prova PVC flange, Prova joints and Prova sealant, so you get one complete waterproofing assembly. All the parts are designed to fit together, and the installation takes just a few hours with common tools. Once it is in, it gives a permanent, maintenance-free seal against water infiltration, which is exactly what a shower or tub area needs.
- Size
- 32 x 60 in
- Drain
- Center drain, bronze finish
- Included
- Sloped pan, Prova PVC flange, Prova joints, Prova sealant
- Protection
- Wall cavities against water and vapor penetration
- Warranty
- Up to 25 years on function, 10 years manufacturer's warranty
Pros
- Prefabricated parts that fit together, with no sloped mortar bed to build
- Installs in a few hours with common tools
- Permanent, maintenance-free waterproof seal
- Protects wall cavities against water and vapor penetration
Cons
- The pan alone does not seal the joint where the floor meets the wall; that seam must be treated carefully with the joints and sealant
- Fixed size, so a longer shower needs the extension kit
A shower niche gives shampoo and soap a permanent home inside the wall, so you do not need a caddy hanging from the shower head. The Prova TT8800NCH33 is prefabricated and waterproof, which removes the hardest part of building a niche: keeping water out of the wall cavity behind it.
It is a grey, adjustable niche of 33 by 16 inches that installs between the wall studs and gets tiled to match the rest of the shower. Because it is a waterproof unit, you avoid the many seams of a site-built niche, which is where I see leaks most often.
- Size
- 33 x 16 in
- Color
- Grey
- Feature
- Adjustable, prefabricated, waterproof
Pros
- Prefabricated, so it is easy to install
- Waterproof construction keeps moisture out of the wall
- Built-in storage for shampoo and soap
Cons
- Must be planned before the wall board goes up
- The edges still need careful sealing to the wall membrane
As the name says, the extension kit is for showers that are bigger than the standard pan. It is a white, pre-sloped tray of 12 by 36 inches, made of high-density Styrofoam, that funnels water toward the drain like the main pan does.
Use it when your shower floor is longer than the kit, so you keep a continuous slope without filling the gap with mortar. Check that the extension matches your pan and drain layout before you order.
- Size
- 12 x 36 in
- Color
- White
- Material
- High-density Styrofoam
- Feature
- Pre-sloped tray that funnels water to the drain
How Does the Prova Shower System Work?
The Prova system replaces two jobs that normally take a lot of skill: building the slope to the drain and waterproofing the floor. The preformed pan gives the slope, and the PVC flange ties the waterproofing to the drain so water that gets through the grout still ends up in the drain.
Prova joints and Prova sealant then connect every piece into one continuous waterproof layer, protecting the wall cavities against water and vapor penetration. The result is a watertight shower that needs no maintenance under the tile.
Installation Overview
The Prova system for tiled showers installs in a few hours with common tools. Follow the Prova instructions for the setting materials and the exact order, but the process looks like this.
- Screwdriver
- Drill
- Level
- Saw
- Sharp knife
- Prepare the subfloor
Make sure the floor is solid, flat and clean, and that the drain is in the right place for the pan.
- Set the drain and pan
Install the PVC flange, then set the sloped pan (and the extension kit if needed) so it sits fully supported.
- Seal the joints
Bond the Prova joints over the seams and corners with Prova sealant, paying extra attention where the floor meets the walls.
- Add the niche and walls
Install the niche between the studs and waterproof the walls so the membrane overlaps the pan.
- Test, then tile
Plug the drain and run a flood test to check for leaks before you set any tile.
Not sure whether your walls need their own membrane? Read our guide on waterproofing shower walls and floors before tiling.
What Buyers Say
Buyer feedback on the Prova shower system is mostly positive. People like how much time it saves during installation and how the shower looks once it is tiled. Even buyers who ran into problems generally said they were happy with Prova's customer service.
Frequently Asked Questions
What is the Prova shower waterproofing system made of?
The heart of the system is a preformed sloped pan and a Prova PVC drain flange, sealed with Prova joint pieces and Prova sealant.
How long does it take to install the Prova shower system?
A complete installation takes a few hours, because the pan replaces the sloped mortar bed that normally needs time to build and cure.
What tools do I need to install the Prova shower system?
Common tools: a screwdriver, a drill, a level, a saw and a sharp knife, plus the setting materials listed in the Prova instructions.
Can the Prova shower system be used for remodels?
Yes. It works for remodels as well as new construction, as long as the subfloor is solid and flat.
Who should use the Prova shower system?
Anyone building a tiled shower or another area with high moisture exposure who wants a faster, prefabricated waterproofing method.
Where can I buy a Prova shower system?
From the official Prova website or from online stores such as Amazon.
Which waterproofing systems does Prova offer?
Prova's range includes Prova-Seal, Prova-Tub, Prova-Shower and Prova sealant.
The Prova shower system is an easy-to-install, permanent way to waterproof a tiled shower without a mortar bed. Start with the TT8509BRZ05 kit, add the extension kit if your shower is longer, and include the niche while the walls are open. Seal every joint carefully, run a flood test, and your shower will stay dry for years.
Source